Contact Us
TEL: +86-510-86180056
Fax: +86-510-86189830
E-mail: zhouzhen0404@hotmail.com
Address: No.219, Nanjiao Road, Nanzha Town, Jiangyin, Wuxi, Jiangsu, China (Mainland)
Home > Knowledge > Content
Classification and mechanical strength of single-phase EI silicon steel sheets
Aug 08, 2018

Single-phase EI silicon steel sheets can be divided into low-silicon and high-silicon according to their silicon content. When they are fabricated, their low silicon wafers contain less than 2.8% silicon, which has a certain mechanical strength during operation, and is mainly used for Manufacturing of motors, commonly known as motor silicon steel sheets, high silicon wafers containing 2.8%-4.8% silicon, it has good magnetic properties, but is brittle, mainly used to manufacture transformer cores, commonly known as transformer silicon steel sheets. There is no strict limit between the two in actual use, and high-silicon wafers are often used to manufacture large motors.

  

Single-phase EI silicon steel sheet is a kind of magnetic material which is better used in electrician. It is classified according to its silicon content in classification. Its silicon steel sheet has better magnetic induction intensity and lower level. Loss. Silicon steel sheet also has a good advantage in punching performance, and it is also easy to weld. Silicon steel sheet for electrician has excellent electromagnetic performance and is an indispensable important magnetic material in the power, telecommunications and instrumentation industries.

  

Single-phase EI silicon steel sheets can be divided into low silicon and high silicon according to different silicon content. Low silicon wafer contains 2.8% or less silicon. It has certain mechanical strength and is mainly used for manufacturing motors, commonly known as motor silicon steel sheets; high silicon. The silicon content of the sheet is 2.8%-4.8%. It has good magnetic properties but is brittle. It is mainly used to manufacture transformer cores, commonly known as transformer silicon steel sheets. There is no strict limit in actual use, and high silicon wafers are commonly used to manufacture large scales. Motor.

http://www.ht-siliconsteel.com/


Previous: Control and process of silicon steel transformer core production process

Next: Production requirements for 3 Phase EI Lamination with holes